Yesterday I faced an issue which took more 2-3 hour to get sorted. I had old Nutanix Block on which I need to do the foundation when I started the foundation using Nutanix Foundation VM and got error foundation process failed with error “ Unable to set IPMI IPs)

• I tried to set IPMI IP on the Nutanix Nodes manually, but strange thing even after setting up IPMI IPs I was unable to ping the IPMI interface. I tried on Shared/ dedicated IPMI Port but failed.
• The hardware I was using was old Nutanix Block from G4 Generation, and there was no other options in IPMI Menu in System Setup to modify except IP Address
• I tried to login Hypervisor , but failed as I don’t have IP root password.

Moving forward, I got an idea make one bootable using download IPMItool from SuperMicro Website, boot the nodes from USB Drive.

• When I run the IPMICFG tool and get the current VLAN Status, VLAN ID was ON on the IPMI interface. I turned off the VLAN ID.

IPMICFG -vlan off

Incase if you have access on the hypervisor IPMItool can be used to trun-off the VLAN ID, using below command to turn off VLAN Id from ESXi Host.

/ipmitool lan set 1 vlan ID off

Once the VLAN off, I am able to access IPMI ports and proceed with foundation.

IPMICFG Can be download from below link

https://www.supermicro.com/SwDownload/SwSelect_Free.aspx?cat=IPMI